Crest COC6B-1817 Ultrasonic Cleaning System, New in 2014
Have one to sell?
ConditionUsed
1 available
Crest COC6B-1817 Ultrasonic Cleaning System
System is As-New, originally manufactured in 2014
6-Station with tank size 18”x17”x15” deep with Immersables ( available in 8 weeks)
Set up for a 5-tank or 6-tank plus load / off-load stations
3-Polyethylene tanks, Air-Blow (with cables, NO generators), blow dryer PLUS Vacuum Dry
Tank-W 18"
Tank-L 17"
Tank-H 18"
Number of Tanks 6
Transfer System? Yes
Weight 5,323 lbs
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
Stations:
1: Load
2: Ultrasonic immersion wash
3: Spray‐over‐immersion quick dump rinse
4: Ultrasonic acid wash (Citric)
5: Ultrasonic Rinse
6: Recirculation hot air dryer
7: Vacuum dryer console (CVDs‐1817)
8: Basket positioner platform
General Specifications:
Tank Dimensions: 18″ X 17″ X 18″ (126)″
[left to right X front to back X depth (liquid depth)]
Process Flow: Left to Right
Automation: CTS‐2000‐AB‐MAPLE‐RIGIBOT
Power Requirement:
System: 480Volts/60Hz/3 phase/70.6Amp
Quick Dump: 480Volts/60Hz/3 phase
Fire Suppression: 480Volts/60Hz/3 phase/46.3Amp
Frame Material: Type 304 stainless steel, lift‐out access panels on the side and rear.
Access Panels: Type 304, #4 finish, stainless steel sliding access door on the front.
Countertop: A type 304polypropylene, removable countertop. The countertop will be fitted with removable polypropylene drainbacks (between the process stations).
Base Plate: A type 304 stainless steel base plate.
Rigibot CTS-2000-AB-MAPLE
Control: Allen-Bradley SLC500 PLC
(Maple system 1550H color touch screen
Capacity: 200 lbs
Travel Speed (Horizontal/Vertical): 100 / 17 FPM
Positioning Accuracy (Horizontal/Vertical): 0.2" / +/- 0.02"
Dimensions:
Machine (LxD) with Robot: 273” x 60”
Machine (LxD) without Robot: 273” x 50”
Machine (LxD) w/o Robot AND Track (Using manually): 273” x 40”
Control Cabinet: 33” x 21” (plenty of cable for locating control)
This unit, Original manufactured in 2014, has never been installed.
Ultrasonic 6-station wash rinse and dry system with automation. Can be used as a Wash, Rinse, Passivate, Rinse and Dry system. System includes a final vacuum drying process to speed drying times and dry blind holes and tight spaces that are tough to dry with convection drying. Tank size 18”x17”x15” deep.
It can be configured as a 5 or 6 tanks System, depending on if buyer needs both hot air and/or vacuum dryer
Excellent for passivation
Crest Rigibot CTS-2000-AB-MAPLE Robot installed. Track is complete through 2-stations. Additional can be ordered through Crest Ultrasonics (please ask)
A-B CLC-500 PLC Controller
Hot air blow dryer and Vacuum Dryer
Originally manufactured in 2014, Tested at factory only, never in operation
6-Tank with tank: 18”x17”x18” D - great for PASSIVATION
Currently, this unit is set up with 40 KhZ ultrasonic transducers mounted to the base of the
3-Polyethylene tanks, Air-Blow (with cables, NO generators), blow dryer PLUS Vacuum Dry
Currently, buyer can operated this unit manually or upgrade to Fully Automatic transfer system.
We are offering this unit up and running for manual operation, "As-Is" or with assistance in upgrading
to a fully automated transfer system
Can provide contacts at Crest and support prior to moving. Original build, 2014. Tested at Crest Ultrasonic and never installed
We use cookies to improve your experience. Privacy Policy.