Doosan Puma 5100LB CNC Turning Center

CAPACITY:
Swing over bed 900 mm (35.4")
Swing over carriage 690 mm (27.16")
Maximum turning diameter 650 mm (25.6")
Maximum turning length 82.4” Distance between spindle nose and tailstock center 84.8”

SPINDLE:
Spindle speed 1,500 rpm
Spindle nose A1-15
Draw tube ID 166.5 mm (6.55")
Spindle bore diameter 181 mm (7.12")
AC spindle motor (30 min. rating) 45 kW (60 hp)
Spindle speed ranges 2
Maximum spindle torque (30 min. rating) 4,038 Nm (2,978 ft-lb)

BED, SADDLE & CROSS SLIDE:
Angle of slant bed 45 degree
X axis travel 362 mm (14.3")
Z axis travel 84.8”
X axis guide way span 360 mm (14.2")
Z axis guide way span 420 mm (16.5")
X axis rapid traverse rate 16 m/min (630 ipm)
Z axis rapid traverse rate 20 m/min (790 ipm)
X axis ball screw diameter 40 mm (1.57")
Z axis ball screw diameter 50 mm (2.0")
X axis feed thrust (continuous) 15,517 N (3,488 lb)
X axis feed thrust (intermittent) 21,724 N (4,883 lb)
Z axis feed thrust (continuous) 21,502 N (4,830 lb)
Z axis feed thrust (intermittent) 32,253 N (7,250 lb)

TURRET:
Number of tools 10

TAILSTOCK:
Tailstock center MT #5
Tailstock quill diameter 120 mm (4.7")
Tailstock quill stroke (programmable) 120 mm (4.7")
Tailstock body stroke 1,000 mm (39.4")
Maximum tailstock quill thrust 14.3 kN (3,210 lb)
Maximum tailstock hydraulic pressure 40 bar (580 psi)
Tailstock guide way span 300 mm (11.8")

COOLANT SYSTEM:
Coolant pump pressure 4.5 bar (65 psi)
Coolant pump motor 1.1 kW (1.4 hp)
Coolant tank capacity 280 l (74 gal)

HYDRAULIC / LUBRICATION:
Hydraulic tank capacity 16 l (4.2 gal)
Hydraulic oil required* Mobil DTE #24 or Shell Tellus 32
Way lubrication tank capacity 4.3 l (1.1 gal)
Way lubrication oil required* Mobil Vactra #2 or Shell Tonna T68

GENERAL:
Machine weight 26,560 lbs.
Floor space – length x width 231.5” x90” x 89.5”
Floor space – length with hinge belt chip conveyor Approximately 281”
Machine Height 89.5”
Height from floor to spindle center 1,163 mm (45.8")
Voltage required 205-235V/3 ph/60 Hz
Power requirement 61 kVA (160 Amps @ 220 Volts)