Yama Seiki GTZ-2600Y, New in 2018
Have one to sell?
ConditionUsed
1 available
Like New. 873 Cutting Hours! For sale is a used 2018 Yama Seiki GTZ-2600Y CNC Lathes Multi-Axis with great specs, including a 10.62" swing over bed, max cutting diameter of 9.84" & cutting length of 23.3”. It features 7.67" X-Axis and 3.93" Y-Axis travel, with a rapid traverse rate on all axes. The machine is equipped with twin big bore spindles, twin turrets & 16-station turret, with a high-pressure coolant system and Renishaw tool presetter. Tooling includes 3 axial and 3 radial units. Machine replacement cost new is over $300,000. Has been in use since February 2019.
SWING OVER BED 10.62"
MAX CUTTING DIAMETER 9.84"
MAX CUTTING LENGTH 23.3"
X-AXIS TRAVEL 7.67"
Y-AXIS TRAVEL 3.93" = ± 1.96"
Z-AXIS TRAVEL 24.4"
CHUCK SIZE 8"
BAR CAPACITY 2.55"
SPINDLE BORE 2.99"
SPINDLE NOSE A2-6
SPINDLE MOTOR 20 hp
SPINDLE SPEED 4,000 RPM
RAPID TRAVERSE RATE - X-AXIS 945 in/min.
RAPID TRAVERSE RATE - Y-AXIS 394 in/min.
RAPID TRAVERSE RATE - Z-AXIS 945 in/min.
SUB SPINDLE Yes
SUB SPINDLE - CHUCK SIZE 8"
SUB SPINDLE - BAR CAPACITY 2.55"
SUB SPINDLE - SPINDLE BORE 2.99"
SUB SPINDLE - SPINDLE NOSE A2-6
SUB SPINDLE - SPINDLE MOTOR 20 hp
SUB SPINDLE - SPINDLE SPEED 4,000 RPM
TURRET 2 - X-AXIS TRAVEL 7.67"
TURRET 2 - Z-AXIS TRAVEL 24.4"
TURRET CAPACITY 16
LIVE MILLING Yes
LIVE MILLING SPEED 6,000 RPM
LIVE MILLING MOTOR 7.3 hp
TURRET 2 CAPACITY 16
Y-AXIS Yes
Control CNC (FANUC 31I)
Dimensions 176"L x 101"W x 93"H
Weight 19,000 LBS
FANUC 31i CONTROL G.LINC 350
Y-AXIS (UPPER TURRET)
C-AXIS (BOTH TURRETS)
TWIN BIG BORE SPINDLES & TWIN TURRETS
16-STATION TURRET (UPGRADE)
MAX TOOL STATION CAPACITY IS UP TO 32 TOOLS
COOLANT THROUGH SPINDLE
RENISHAW TOOL PRESETTER
(2) MICROCENTRIC COLLET CHUCKS
(2) 3-JAW 8" HYDRAULIC CHUCKS
LONG PARTS EJECTOR (SUB)
PARTS CATCHER
PARTS CONVEYOR
CHIP CONVEYOR
BARFEED INTERFACE
ALLCOOL HIGH PRESSURE COOLANT SYSTEM (1000 PSI)
COOLANT FLUSH SLIDE WAY COVERS
ROLLER TYPE LINEAR GUIDE WAYS
(2) SETS ADDITIONAL M-CODES
TOOLING INCLUDED:
(3) AXIAL
(3) RADIAL
MULTI-TASKING CAPABILITIES:
WORK-PIECE MOVED BETWEEN SPINDLES
DUAL TURRET WORK ON THE WORK-PIECE SIMULTANEOUSLY
UPPER TURRET WORK ON RIGHT SPINDLE & LOWER TURRET WORK ON LEFT SPINDLE
UPPER TURRET WORK ON LEFT SPINDLE & LOWER TURRET WORK ON RIGHT SPINDLE
** ORIGINAL OWNER
** AS OF OCTOBER, 2023 - CUTTING TIME: 843 HOURS
** BUILT OCTOBER, 2018 & INSTALLED FEBRUARY, 2019
** MACHINE REPLACEMENT COST NEW: $295,000
** IN PLANT, UNDER POWER, & READY FOR IMMEDIATE INSPECTION & PURCHASE
We use cookies to improve your experience. Privacy Policy.