Fadal Model #402HT CNC Vertical Machining Center
Vertical Machining Centers.jpg)
.jpg)
| X | 40" |
| Y | 20" |
| Z | 28" |
| Power | 22.5 hp |
| RPM | 10,000 RPM |
| # ATC | 21 |
| Taper | CAT-40 |
| Table-W | 20" |
| Table-L | 48" |
| # Axis | 3 |
Machine is under power can be run and inspected. It is a 1995 4020 10000 rpm spindle. Recently refurbished has new spindle motor. Drive belts and any parts that needed to be replaced. Machine is ready to go. Has expanded memory as well as all upgraded -5 cards and CRT monitor. 4020HT rigid tapping, high speed processor, coolant tank and pump fitted with quick disconnects for coolant as well as air plumbed with quick disconnect at front of machine with wash down hose, boxed ways, expanded
